Portfolio Category: High containment

Re-cleanable Filter Systems

Top-down principle Lower depths of filter elements for critical dust Very high cleaning pressure (up to 4 bar overpressure in nozzle bar) Patented, reinforced RHF ® standard size elements Pressure loss reduction through cleaning process, i. e. Lower and more constant initial pressure drop after cleaning Higher working pressure drop in filter possible …

Adsorption Filter Type CFH

Easy handling of the safe change technology Only filter housing and carbon, no changing element required Compact and versatile design Simple, efficient and clean refill procedure High protection of environment and operational staff Downloads Productfoto’s

Rectangular Gastight Damper Type GD-R

The specially designed kinematical mechanism secures the damper blade at the end positions “open” and “close” by means of special toggle levers in case of a failure of energy support. Two concentric sealing rings fixed to the damper seat create high tightness as well as a test groove in the gap between the two sealing rings. In order to test …

Rectangular Damper Type S

The shut-off damper consists of a damper housing, a hinged damper blade with the damper shaft as its bearings, and an actuating cylinder moving the damper blade by an actuating equipment. A sealing profile made of silicone rubber is fastened to the damper blade by a leading bar. Upon closure of the damper, this sealing profile is pressed against the …

Circular Gastight Damper Type GD-C

The actual leakage rates for housings and seat of damper blade are much lower than specified in the requirement according to DIN 25 496. The damper is designed to operate without any failure at an operating pressure of 1.1- times of the admissible operating pressure of the damper. The tightness of seat of damper blade is testable in built-in situation. …